Introduction
Mold remediation is a practice that involves the removal of mold from a commercial or a residential environment. If the mold has spread in a large area, it is good to hire professionals in home remediation services. This is because they use specialized methods and equipment to eliminate the mold. It is a requirement by the Environmental Protection Agency (EPA) that homeowners can only remediate a moldy area that is not more than 10 feet square because they may be health risks associated with the process. The process of mold remediation is only deemed successful when no mold smell and no mold remains visible.
When mold is identified in an area, it is advisable to stay away from that area because it can damage structures and also cause health risks over time. Safe mold remediation engages controlled destruction and proper disposal of materials that have been contaminated by mold. Thorough cleaning and also sanitization of all affected areas are also compulsory during the process.
The whole process of mold remediation is driven by two important goals that are to locate and eliminate all mold from a property. This article discusses what happens during the mold remediation process.
5 Things that Happens During the Mold Remediation Process
1. Initial Walkthrough
The first thing when a moldy area is identified is to contact a professional for home remediation services to look at the situation. These are well-trained technicians to know where and what to look for to help them plan well for the removal of the mold. During this time of visit, they do a thorough inspection to gather enough information about the condition of the problem. They also write a report after the assessment. The information contained in the report includes:
- Photos of the areas affected.
- Any information is given about the problem.
- Type of Mold.
- What might be the cause of the mold?
- What is to be done to fix the problem (mold).
2. Possibility of Relocation
Depending on the location and the size of the area with mold, people might be asked to leave or vacate for the time the place is being worked on. Only the professionals are allowed in and out of the rooms undergoing mold remediation. This is to protect the people from the health risk that can be caused by the mold spores that may be in the air. Generally, it is the professionals that decide whether the occupants will leave or not depending on their assessment and the amount of work that needs to be done.
3. Preparing the Area
At times depending on their assessment, the experts might find the mold to be bad for the crew to start working immediately. Where the affected area is considerably large, they first seal it off.
They then remove the furniture from the area. IN all this process, these experts act with a lot of care because the mold spores being too small can easily float around posing a health risk.
Fans are set up, to blow the air room to the outside. This helps to prevent the dangerous spores from the molds from settling in the room which ends up posing a hazard.
4. Eliminating Mold
Eliminating mold is the most crucial step during the process. The experts begin the work in full bodysuits and face mask protectives. No outsider is allowed to go near during the process. The technique and method used in the elimination of the mold vary according to several factors. These factors include the location of the affected area, how large the area is, how it is accessed, and finally the type of mold.
5. Eliminating Mold on Objects
Having eliminated the mold and applied the necessary treatment doesn’t mean that the work is done. Some areas need to be checked for mold before the experts finalize their job. This is because the areas with mold may have involved several other items that would need to be cleaned to remove the mold. May include items like plastics, wood, concrete, and glass.
The experts doing the service of home remediation have to ensure that mold is removed from these items. They do this by cleaning the items with a cleaning mixture that kills any mold present on them. The cleaning mixture is then dried completely from the items before those items are returned to their original place.
Lastly, the remediating team has to inform the home occupants when to reoccupy their premises again after the process. The cause of the mold may also be checked and rectified before the team leaves to avoid another mold in the future.
