To perform Victony WiFi extender setup in a hassle-free manner, the device (Victony extender) must be connected to your host router. But, a number of users face issues while trying to connect their devices. If you are also amongst them, then know that we have a solution for you.
Walk through this piece of writing and know how to troubleshoot the “Victony WiFi extender not connecting to router” issue from the comfort of your home. Let’s get started with the process.
But, hold on! First, we will provide you reasons causing the issue? The reason being, if you know the reason, it will be easy for you to troubleshoot the issue, right? Hence, scroll down a little to know the reasons!
Why Victony Extender Not Connecting to Router?
You might be thinking why your Victony WiFi extender is refusing to make a pair with your host router, right? Well, think no more! Highlighted below are some of the topmost reasons causing the issue:
- The Ethernet cable connecting your devices is worn out or damaged
- Maybe the cable isn’t inserted firmly
- Your Victony WiFi extender and the router are placed at too much distance
- Issues from your ISP’s end can also lead to the issue
- Bad placement of your devices
- Technical glitches
So, these were some of the common yet major reasons behind getting the “Victony WiFi extender not connecting to router” issue. Now, scroll down a little and make yourself acquainted with the troubleshooting hacks to get the issue fixed.
Victony Extender and Router Not Connecting
The Relevant Fixes
Check the Ethernet Cable
Start troubleshooting the issue by checking the Ethernet cable connecting your Victony WiFi range extender and router. It seems like the cable used by you is damaged or worn out, as mentioned earlier. If so, then usage of a non-working cable might have caused all the fuss. Hence, to fix the issue, it is suggested to replace your existing Ethernet cable with a new one.
On the off chance, you don’t have another cable handy, then you can go out in the market to shop for the same. And, once you have it, insert its one end firmly into the Ethernet port of your Victony extender and the other end into the Ethernet port of your router.
Fix 2: Place Your Devices Closer
Now, you might be confused about whether to go out to shop for a new Ethernet cable or not. If you do, then your devices can be connected. And, if you drop the idea of purchasing the cable, the process of connecting them will be pending, right?
Ok, don’t be confused! Let us help you with this! If you really don’t want to go out and want to connect your devices, then we have a solution. Yes, absolutely! Just go ahead and connect your Victony WiFi extender to your host router in a wireless manner. But, for this, placing them at too much distance will not work. If you want to get success with connecting your devices wirelessly, you must keep them closer to each other.
Just choose an area in your home that have two wall plugs closer or at a safe distance in the same room. While connecting your devices wirelessly, you must avoid plugging them closer to walls, windows, or in a corner. Also, if you have hidden your host router inside a cabinet, provide it with fresh air by placing it on an open, higher, and well-ventilated surface.
Now, try to connect the Victony WiFi extender to your host router. Any luck? Verify it by accessing Victony WiFi extender loginpage.
Pro Tip: If you have decided to connect your Victony extender to the host router using a wireless source, then ensure that you are receiving pretty good internet speed from the end of your ISP.
Fix 3: Restart Your Victony Extender
At times, technical glitches can also lead you to experience the “Victony WiFi extender not connecting to router” issue. Thus, to cope with this issue, you need to restart your Victony WiFi extender. Just unplug it, wait for a few minutes, and then plug it back in again.
After restarting your Victony WiFi range extender, see if you rack up success with the connecting process or not.
Although the hacks listed above will help you resolve the issue, if they don’t, then try connecting your Victony extender and router via a WPS source. Simply press the WPS button on your host router and then on your Victony device. But, for using this process, your router must have the WPS function on it.
Did the hacks listed in this piece of writing help you deal with the “Victony WiFi extender not connecting to router” issue.
