Does your Netgear Orbi device keep flashing purple for no reason at all? Well, your WiFi device wouldn’t be causing this issue for no apparent reason. There got to be something! Like a weak internet connection, unstable connection between the Orbi router and modem, corrupted firmware, etc. Such technical issues always have a reason behind their existence.
But, the good news is that even if there are 100 of reasons behind why you’re facing the Orbi purple light issue, the troubleshooting steps mentioned here will help you fix the problem. Thus, walk through this post and learn how to stop the constant blinking of purple LED on your device.
How to Fix the Netgear Orbi Purple Light Issue?
-
Call Your Internet Service Provider
One of the major reasons why your Netgear Orbi is blinking purple is because of a weak internet connection. Chances are that your Internet Service Provider is at fault. Call to them to confirm whether the internet issue is from their end or not. In case it is, ask them to send an agent over to your house to fix the issue.
In case the internet issue isn’t from the end of your ISP, then it means that you data pack has expired. Thus, recharge now!
-
Check All Your Cable Connections
Sometimes, the reason why your Netgear Orbi device is flashing purple is because of loose cable connections. Therefore, make sure that all your cable connections are finger-tight. By any chance, if any of your cables have cuts, get them fixed immediately.
Now, access the orbilogin administrative page and check whether the issue has been fixed or not. If not, then keep reading.
-
Restart Your Netgear Orbi Router
Rebooting your Netgear Orbi device is another way through which you can get rid of the Netgear Orbi purple light issue. Follow the instructions mentioned below to power cycle your Netgear WiFi device:
Disconnect all the connected devices from your Orbi.
- Power off your Orbi router and unplug it from the socket.
- Then, count to 10 and plug the router back into the socket.
- Press the Power button on the Orbi router and connect it to the modem.
After restarting your device, see if the Orbi purple light issue has been fixed or not. Still no luck? Perhaps, updating your device might work.
-
Update the Orbi’s Firmware
An outdated or corrupted firmware is the root of many technical issues. Chances are that it’s the root cause behind the Orbi purple light issue too. But, fret not! Updating your Orbi would put an end to this issue.
You can update the firmware of your WiFi device by using two different methods. The first is by accessing the orbilogin.com page, and the second is by downloading
-
Properly Configure the Hardware
If performing Netgear Orbi login and updating your device still didn’t resolve the Orbi purple light issue, then there is a high possibility that the hardware of your device is damaged. Therefore, check the hardware of your Netgear Orbi router properly.
Check the connection between your Netgear router and modem. Are they connected properly? If not, use an Ethernet cable to connect them then.
The Bottom Line
Thus, this was all about how to troubleshoot the Netgear Orbi purple light issue. We hope that this article helped you troubleshooting the issue that you were facing with your device. On the off chance, if the Netgear Orbi purple light issue persists, then it is recommended that you perform factory default reset. After restoring your device to its factory default settings, check whether the issue has been fixed or not. Let’s hope for the best.
