Netgear Orbi devices have two LED lights on them. One is the Power LED and the other one is the Ring LED. These lights help you know the current status of the Orbi device. For instance, if everything is fine the Power light would be off while the ring light would be solid white. In case there is something wrong with the device, you will get an idea by seeing the unusual behavior of the light. You can then check the device. Maybe you need to access the Orbi router login page to go to its settings and make the necessary changes. This page will help you walk through what it means to see a blinking white light on your Orbi device. Keep on reading further to learn A to Z of a white light that blinks on your Orbi.
Netgear Orbi Blinking White Light: Meaning
Ideally when you see a white light blinking on your Orbi router or satellite, know that it is in factory default mode. You can go ahead and get its configuration done.
In other instances, your Orbi router will blink white when any configuration settings are being applied to it or its firmware is getting updated. As soon as the firmware is updated or the settings have been applied, the blinking white light would go off.
However, if it continues to blink and does not change then there is something that you need to do about it. This generally happens when the firmware got corrupted, or due to power failure, the firmware update process got interrupted.
Let us help you fix the blinking white light on your Netgear Orbi.
Fixing Netgear Orbi Blinking White Light
1. Check Power Supply
First of all, check the power supply to the Orbi device. The poor power supply can affect its functioning. Thus, check the power cable and the power socket that are used to supply power to the Orbi. If the power cable is loose then fix the loose connection. Also, if the power socket is damaged, then use another socket to plug in the device.
While the firmware is getting updated or you are making any changes to its settings, the Orbi device must be receiving a proper power supply. Keeping this into consideration, make the required changes and then see if the Orbi light still blinks.
2. Fix Internet Connection
A shaky internet connection can also be the cause behind the white light that blinks. Thus, see if the Orbi router is firmly connected to the modem or not. If the devices are placed far from each other then consider bringing them closer now. If you have used an Ethernet cable to make the connection between the two devices, then see if the cable is loose or broken. Get the faulty cable replaced immediately and ensure a finger-tight connection.
3. Reboot the Orbi
Blinking white light and similar issues on your Orbi can be easily taken care of by rebooting it once. Power off the Orbi device right away and let it sit this way for a while. After waiting for some time, power it up once again and see if the lights on it are normal now. If it keeps on blinking white even now then you have one final troubleshooting hack to be followed.
Resetting the Orbi is the last option that you are left with. It could have happened that the firmware on your Orbi device is corrupted which is why it is giving you trouble. The firmware update process should never be interrupted to avoid any issues. But looks like you forgot this and hence are struggling with the issue under discussion. Reset your Orbi right now to restore the factory values on it. Here is how you can reset it:
- Disconnect the Orbi router from the modem.
- Now, power it up and wait till it is completely turned on.
- Next, look for a reset hole on it.
- Once you get it, push it carefully using a paper pin.
- Your Orbi is now running on the factory settings.
Now, go to the Orbi login page on a browser and set it up once again from the very beginning.
The Final Note
The moment you are done with reconfiguring your Orbi device post resetting it, you will no longer be seeing the blinking white light on it. We recommend you to update its firmware now once again. This time make certain the process does not get interrupted by any means.