Netgear Extender Not Connecting to Router? Here’s the Fix!

Thomas Oshobo

Is your Netgear extender refusing to connect to the router? Don’t worry! You’ve landed on the right post. Here, we will make you aware of various troubleshooting hacks that will help you get rid of the ‘Netgear extender not connecting to router’ issue. So, without any delay, let’s start.

Fixed: Netgear Extender Not Connecting to Router

For a successful Netgear extender setup using the 192.168.1.250 IP address, connection between the extender and the router is necessary. But, it can be troublesome if the Netgear extender won’t connect to the router. Following hacks will help you fix the issue with ease:

  1. Check the Hardware

Your Netgear extender won’t be connecting to the router if it is not receiving a continuous power supply. To confirm this, check the status of the power LED on your Netgear extender. If it is not glowing green, then you might have plugged your extender into a damaged wall socket.

So, consider plugging your Netgear range extender into a damage-free wall outlet. Furthermore, ensure that the hardware of your device is not faulty.

  1. Place Your Extender Properly

The incorrect placement of your WiFi device can also lead you to the ‘Netgear extender not connecting to router’ issue and halt access to the Netgear Genie setup wizard. So, you should aim for the optimal placement of your Netgear extender.

Remember the following points while relocating your Netgear extender:

  • Your Netgear extender and router should be placed in the same room. Besides, do not place them either too close or far.

  • Place your Netgear extender away from walls, ceilings, and floors.

  • Avoid placing the Netgear extender inside a closet or beneath a table.

  • Keep your Netgear extender away from electronic gadgets, Bluetooth devices, metal objects, and reflexive objects. Such things can create obstacle in the path of your Netgear extender’s WiFi signals.

After placing your Netgear extender at an ideal position, check if it is able to connect to the router or not. If not, then give a shot to the next troubleshooting hack.

  1. Check the Connection Between WiFi Devices

The improper connection between your Netgear extender and router is also one of the most prominent reasons behind the ‘Netgear extender not connecting to router’ issue. So, to fix this, consider the following points:

  • Use an Ethernet cable to connect your Netgear extender and the router instead of a wireless connection.

  • If you are already using an Ethernet cable, check for the damage on it. Chances are that it has cuts that are making it difficult for the Netgear extender to connect to the router. Just in case, there are cuts on the Ethernet cable, get it replaced with a new one.

Everything is fine with the connection between your devices but the issue is still bothering you? Looks like your extender is not configured properly.

  1. Reset and Reconfigure

To reconfigure your Netgear extender, you need to reset it first. Doing so will not only erase all the personalized settings (SSID, network key, security type) from your extender but will also bring you success in resolving the issue.

To restore your Netgear wireless extender to factory default settings, refer to the following instructions:

  • Ensure that your Netgear extender is receiving adequate power supply.

  • Once assured, look for the Reset button on your Netgear range extender.

  • When found, grab a paper clip or a toothpick.

  • Use it to press the Reset button on your Netgear extender.

  • Your Netgear range extender will get restored to its factory default settings.

Once done, reconfigure your WiFi device by accessing mywifiext.local.

In Conclusion

This was all about what to do if your Netgear extender is not connecting to the router. Let’s hope that you will be able to connect your Netgear extender to the router and regain access to a seamless internet connection by following the tips mentioned above.

Related posts