Won’t Load? Here’s the Fix! is a very helpful URL because it enables Netgear users to set up and log in to their new extenders. Not only that, but it also assists users in modifying the WiFi range extender’s settings after completing the installation of the new extender. When attempting to log in to their Netgear extenders, users occasionally run into the won’t load issue.

Thankfully, you have arrived at the right post if getting the same issue. We’ve compiled some of the best troubleshooting tips in this guide, so you may follow them to solve the problem at hand. However, you must first understand the causes of the won’t load issue.

Reasons Why Won’t Load for Users

The following are some of the main causes of the not working problem:

  • The URL you entered is incorrect.
  • The web address has been entered into the web browser’s search bar.
  • You might be unable to access due to technical glitches.
  • The Ethernet cable connection between your router and extender is not secure.
  • Your extender and router are unconnected due to the huge distance.
  • The device you are using has a VPN or proxy enabled.
  • Your Netgear extender’s signals are being interrupted or obstructed.
  • Your Netgear extender’s firmware hasn’t been timely updated.
  • You didn’t correctly set up the new extender.

Whatever may be preventing you from accessing, the troubleshooting tips listed below will undoubtedly help you resolve the problem.

Troubleshoot: Won’t Load 

  • Ensure that you entered the Netgear wireless range extender’s default web address into the address bar of your web browser. While doing so, avoid typos. Cross-check the default web address you entered as well.
  • Another method of resolving the not working problem is to power cycle your Netgear extender. You must unplug your extender from the wall socket, wait a while, and then plug it back into its outlet. Once done, try accessing and see if it is accessible to you.
  • Inspect the Ethernet wire that connects your home router and Netgear extender. Is it shabby or harmed in any way? If the answer to your question is positive, you should get hold of a new Ethernet cable for connecting your devices. If you are not having access to another cable, at present, connect your WiFi devices wirelessly.
  • Your Netgear extender and home router won’t be able to communicate with each other if they are too far from each other. Therefore, be sure to position your wireless devices nearby.
  • Consider temporarily removing the VPN or proxy applications on your device if you are still having trouble with the not functioning issue.
  • Remember to keep your Netgear extender away from reflective surfaces, metal objects, and transmitting appliances. These all can hinder the process of accessing
  • If you have not updated the firmware of your extender on time, then perhaps your extender got bugs or security issues. In that case, you need to reconfigure your device. Or, if after following the above points, you have got a fix for the won’t load issue, then keep in mind to update the firmware of your extender, whenever a new one is available.

Did nothing work so far? Well, to resolve the not working issue, you may also try performing a new extender setup from the scratch. Here’s how:

Reset Your Netgear Extender

Before you try re-configuring your extender, first reset your device to default factory settings.

  • Make sure your extender is not connected to any device, using cable or wirelessly.
  • Press the Reset button on your extender.
  • In a while, your device will reboot and get restored to default settings.

Now, you are all set to reconfigure your Netgear extender.

How to Reconfigure Netgear Extender? 

  • Let your extender get sufficient supply. For this, connect the adapter of your device to a power socket.
  • Establish a connection between your router and extender using a working Ethernet cable.
  • Open a web browser on the device of your choice and type in the address field.
  • Pressing the Enter key, you will come across the login page of your extender.
  • Enter the default login username and password of your Netgear extender into the fields given and click Log In.
  • The setup wizard of your Netgear extender will come into view guiding you with certain on-screen instructions.

Follow all the guidelines the same as specified and this is how you can get the Netgear extender setup process completed.

With that, let’s put an end to our post on fixing won’t load issue. We hope you will get success with fixing the issue at hand.

Related posts