Mold Control and Removal: Tips and Tricks

Mold control in the apartment can also be carried out by non-professionals with household remedies or over-the-counter mold removers if there is only a small amount of mold infestation. However, large areas of mold (more than 0.5 m²) should be removed by professionals, otherwise there is a health risk if mold is not cleaned properly. In most cases, mold growth can be prevented by taking appropriate preventive measures. Mold can generally develop in apartments with high humidity and improper ventilation. Condensation points on cold wall spots and insufficient heating of rooms also encourage mold growth.

If you have a major mould problem in your home, expert mould remediation services may be required. Read this blog for detailed information https://www.urdesignmag.com/tips/2022/06/01/mold-removal-versus-mold-remediation-3-things-to-know/.

Making mold control superfluous: preventive measures against mold

Prevent mold through proper ventilation and heating:

Mold control in the apartment could often be prevented by suitable preventive measures. In most cases, the main reason for mold growth indoors is excessive humidity. Tothe need to combat mold in the first place, indoor humidity should not exceed 65-70%. One of the most important measures to reduce humidity is forced ventilation. This should be done several times a day for 5 – 10 minutes through wide open windows.2 The shock ventilation is also particularly useful in the bathroom immediately after showering or bathing. Extraction systems in bathrooms and kitchens can reduce the humidity so reduce. Drying laundry indoors releases a lot of moisture and should be avoided. Consistent heating of all rooms prevents moisture from condensing and usually makes mold control unnecessary. To prevent mold, the room temperature should not fall below 19 °C (living rooms) or 16 °C (bedrooms, basement rooms).

Structural measures for mold prevention:

A good structural condition of the apartment or house is also important to avoid mold control. The outer walls should have an even and intact insulation that does not allow cold bridges to form. Replacing old single glazing reduces the formation of condensation on window sills and panes. Damaged exterior protective coatings in the basement area are a common source of damp masonry and mold in the basement. The air over heaters should be able to circulate freely. In order to improve the air circulation behind built-in cupboards or large pieces of furniture, it has proven to be about 10 cm away from the wall. In areas that are particularly susceptible to mold (bathroom, laundry room), a coat of special anti-mould paint can be useful.

Mold control by the layman

Alcohol (ethyl alcohol) with an alcohol content of 70% for dry surfaces and 80% for damp surfaces has proven effective for mold control by laypersons.1 Small areas of mold are simply rubbed off thoroughly with a cloth soaked in alcohol. After an exposure time of at least 30 minutes, the surface should be washed off with soapy water. For stubborn mold, the procedure may need to be repeated. Hydrogen peroxide (30%) is also suitable for mold control.

Vinegar, on the other hand, is not ideal for fighting mold. Although vinegar mostly kills mold, sometimes vinegar becomes a breeding ground for mold due to possible chemical reactions with the substrate.

The air self-mold remover can also be used for permanent and effective mold control. After treatment with mold remover, surfaces should be cleaned thoroughly with water. In principle, wearing gloves, safety goggles and a face mask when fighting mold is recommended. Clothing, upholstered furniture, wallpaper, carpets or mattresses affected by mold can hardly be cleaned and should therefore be disposed of.

Mold control by professionals

Before engaging a mold removal professional, you should make inquiries about their expertise and qualifications. Certification as a mold remover by the TÜV, for example, is a good indication of qualified companies. A reputable working professional first carries out an inventory before combating mold. For the actual fight against the mould, the professional has plaster milling machines with dust extraction and spray extraction methods at his disposal, among other things. In spray extraction processes, mold is sprayed with a special cleaner. In the same work step, the cleaning agent and loosened mold are then vacuumed off. Professionals also use it to combat mold also highly effective chemicals, which, however, require special expertise and protective measures in handling. If you are living in Oakwood, California, here one by clicking at Mold removal Oakwood.

Preventing mold and fighting mold – the most important facts

  • Ventilation several times a day is the most important preventive measure for combating mold.
  • Cold spots and condensation points encourage mold.
  • Mold sprays, alcohol (at least 70%) and hydrogen peroxide (30%) are suitable for mold control by amateurs.
  • Professionals use, for example, plaster milling machines and spray extraction methods to combat mold.
  • Specialist companies for mold removal can be recognized by a certificate, for example.
  • Professional removal of large areas of mold in 2 – 3 rooms cost at least 700 Dollars.

Related posts