There’s a lot to consider when choosing preschool playground equipment, such as whether it needs flat ground, swing clearance, and how far apart the fences should be. So keep reading to find out what you should consider for your children’s safety.
The following is a list of safety considerations from the US Consumer Product Safety Commission (CPSC) to consider when putting together a playset:
The development of social skills and learning-related skills is a key objective of nursery school programs richmond.
Preschool Outdoor Play Equipment Ground Surfacing Protection
The surface should be strong enough to support the preschool outdoor play equipment while also being soft enough to prevent injury in the case of a fall.
For Fixed Climbing Equipment and Slides:
A minimum of 6 feet around the perimeter should be surfaced with soft, protecting ground for safe use and the prevention of falls.
For swings a minimum of 6 feet of protective surface should be laid out on either side of the support structure, with even more extended from the front and back of the set, at a length roughly twice the height of the swing from ground to support beam.
Spacing between Swing Sets
Allow at least 8 inches between the swing and the support structure, as well as between swings. The distance between the swing support frame and the pendulum seesaw should be at least 16 feet.
Swings should have an 8-inch clearance from the underside to the ground.
Guardrails should be installed on platforms that are higher than 30 inches off the ground to prevent falls.
Potential Entrapment Requirements
Openings that are closed on all sides should be no smaller than 3 1/2 inches and no larger than 9 inches.
Close “S” hooks as firmly as possible and remove any protrusions or catch points from the equipment.
9 Playground Maintenance Ideas
To keep your preschool outdoor play equipment play area safe and enjoyable, keep the following in mind:
1. Examine protective surfacing for suitable area and depth.
2. Repair or replace any loose, damaged, or projecting hardware.
3. Keep equipment footings in good condition and eliminate any potential tripping hazards.
4. Remove any dirt, toys, or garbage from the area.
5. Ensure that there are no natural barriers in the children’s area, such as branches, weeds, rocks, or tree roots.
6. Avoid corrosion and damaged paint on metal components.
7. If possible, remove wood splinters. The structure may be unsafe if the wood is broken or decaying. Stop using the product and contact the manufacturer.
8. Examine structural components that link to the ground for degradation and corrosion. If identified, discontinue use and notify the manufacturer.
9. Equipment components such as handholds, guardrails, and swing seats should never be missing or damaged. As needed, repair or replace.
Thus far, so good now you know:
- How to designate a safe play area in your yard
- What to look for when choosing a system
- What to expect in terms of upkeep
Bring Out Your Tape Measure
You are now ready to demarcate the space for your playground! Keep an eye out for tree roots and make sure there are no branches in the way. Consider the shadows cast by your home at different times of day if you desire shade. Consider a system with UV-protected canopies that casts its own shade.
According to the safety clearances plan to add a cushioning layer or protecting surface beneath the structure. For soft landings, rubber mulch or rubber tile are strongly suggested. However, grass and dirt surfaces are not advised since they are extremely rough and potentially dangerous. So many possibilities!!Contact us if you are looking for new preschool playground equipment that your children will adore!
click here for more articles.