During or after configuring a Netgear WiFi range extender, you may see various LEDs flashing on the device. Every LED flashing on your extender depicts various meanings. For instance, if all the LEDs on your Netgear extender, especially the power one are solid green, it means that your device is working fine. But, just in case, the LEDs on your extender are flashing red or amber in color, it means that the device is stuck with some error. Well, need not worry! We’ve got you covered! In this troubleshooting guide, we are going to make you familiar with the fixes on how to get rid of the Netgear extender red light issue in a fly. Read on!

5 Tips to Fix the Netgear Extender Red Light Error

Step 1: On the off chance if you are seeing a red LED on your Netgear extender then it can be related to connectivity or hardware-related issues. To get rid of the issue, check all the wired and wireless connections you have made between your Netgear extender, router, desktop, laptop, and mobile devices. Just in case, you find the cable connection is loose, ensure that the cable you have used is well-working. Apart from that, if you have connected your devices wirelessly, then make sure that you are connected to the correct network.

Once you’re done, restart your Netgear extender. Once the power LED on the device becomes stable, try to access the mywifiext.net login page using 192.168.1.250 IP and see if the extender red light issue has been fixed for you.

Also Read: https://theforbiz.com/are-you-facing-netgear-extender-setup-issues/

Step 2: Bad placement of your Netgear WiFi range extender can also lead you to experience red light issue. So, to get rid of it, place your Netgear device in the center of your home and on a higher, cool, and ventilated surface. If even after relocating your Netgear extender, you are still getting red color LED on the device, chances are that the device is placed near to interference-creating WiFi devices. To get rid of it, simply place the device away from the reach of public WiFi, Bluetooth speakers, baby monitors, and smart HD TV (that runs on WiFi).

After relocating your extender, check your internet connection by accessing the mywifiext.net login page using 192.168.1.250 IP.

Step 3: Consider this as one of the most important steps. In the event that the Netgear extender firmware update process is in progress, then also you might experience the red light error. To deal with it, wait patiently till the Netgear extender firmware update process gets completed. Once the Netgear firmware update process gets completed, check the LEDs on your extender if they have turned green. On the off chance if the issue remains the same, make sure that you have downloaded the correct firmware version for your device model. You can access the mywifiext.net login page using 192.168.1.250 IP and follow the on-screen instructions regarding the same.

Note: If you need any help regarding the Netgear extender firmware update process, feel free to ask us via comments.

Step 4: Uninterrupted or discontinuous internet connection can also get you entangled in the mess of Netgear extender red light issue. Thus, contact your service provider and ensure that all your internet bills are clear and you are on an active data plan.

As soon as everything gets cleared from your ISP’s end, check your internet connection by accessing the mywifiext.net login page using 192.168.1.250 IP.

Step 5: You can find yourself in the issue of Netgear extender showing red light if your device is not configured properly. To get the issue fixed and to get the most out of your extender, ensure to configure it properly. For Netgear extender configuration:

• Firstly, connect it to the router using an Ethernet cable.
• Turn on a PC or laptop.
• Navigate to mywifiext.net login page using 192.168.1.250 IP.
• Follow the on-screen instructions.

Bonus: Make sure that your Netgear WiFi range extender is getting a continuous power supply from a damage-free wall outlet. Apply this bonus tip and let us know if it worked for you in fixing the Netgear extender red light error or not.