After performing Netgear extender setup, you are free to connect your iPhone to the extender’s network. But, what if that’s exactly what you aren’t able to do? Then what? Well, you’re worrying too much! Let’s ease out the worry lines on your forehead. In this post, you’ll find everything needed in order to resolve the issue at hand. So, wait no more, and read on.
Steps to Fix iPhone Not Connecting to Extender’s Network Issue
Reboot Your Devices
Chances are that some technical glitch is stopping your iPhone and Netgear extender from connecting. To troubleshoot the issue, it is recommended that you power cycle both your devices by turning them off for some time. Once both your devices have had good time to relax, try connecting them again.
Is your iPhone still not connecting to the extender’s Netgear_ext? No problem! Continue reading.
Check the Connection Between Your iPhone and Extender
There is a possibility that you’ve been trying to connect your iPhone to the wrong network all this time. Thus, make sure that you connect your iPhone to the right network. Otherwise, you’ll be stuck with the same issue till God knows when!
Check Your Data Package
An expired data package is another reason why your iPhone isn’t connecting to the extender’s network. Therefore, check your data plan. If it has expired, get it renewed immediately. If even renewing the data package doesn’t work in your favor, then it’s probably because the firmware of your Netgear WiFi range extender is outdated.
Update the Extender’s Firmware
An outdated firmware is one of the major root causes behind every technical issue. Chances are that an outdated firmware is preventing your iPhone to connect to the extender’s network. To fix the issue, update the firmware of your extender to its latest version right away! Don’t know how to do that? No problem! Simply walk through the instructions mentioned below and learn how to update your device:
- Power on your Netgear extender after plugging it into the wall socket.
- Then, create a connection between your Netgear WiFi range extender and router.
- It is recommended that you connect your devices with a wired source.
- Then, switch on your PC and open up a random web browser.
- Access www.mywifiext.net and fill in the default extender login details.
- Once you hit Log In, the Netgear Genie dashboard will appear on your screen.
- Go to Settings > Firmware Update.
Note: You can also update the firmware by logging into your device using 192.168.1.250 default IP.
After performing Netgear firmware update, try to connect your iPhone to WiFi extender’s network. Still stuck with the same issue? Damn it!
Cross-Check the Password
Usually, users prefer changing the default password of their Netgear extender to keep it secure from hackers. If you’ve done the same thing, give yourself a pat on the back! Now, the good news aside, have you entered the same password in your iPhone while trying to connect it to the extender’s network? No? And, there, you’ve found the reason why you aren’t able to connect your iPhone to the network of your Netgear WiFi range extender.
Thus, make sure that you enter the correct password. Or else, don’t blame us for still being stuck with the same issue.
The Bottom Line
This was all about to troubleshoot the ‘iPhone not the connecting to the extender’s network’ issue. We hope that the aforementioned steps helped you in getting rid of the issue. On the off chance, if the issue persists, then waste no more time in restoring your device to its factory default settings.