In this modern era, numerous numbers of people around the world use the Wavlink extender to get the fast blazing speed of the internet throughout the house. If you also want to extend the existing home network then the Wavlink extender is the best option for you.
However, in this article, we are going to tell you about the crucial aspect of Wavlink that is accessing the ap. setup is the default web address of the extender. With the help of this URL, users get access to the Wavlink login. If you want to learn the steps of the procedure, then read out the post from up to bottom. Keep reading!
First, we would like to tell you about the important things that you need to get prepared for before accessing the ap. setup URL.
- Good connection of internet from ISP side.
- Sufficient power supply from the power socket.
- Updated internet browser.
- Computer or laptop.
Thus, these are essential requirements that you need to prepare just before the process to access the default web address. Now, let’s move to the steps of the procedure.
Steps Access Ap.setup Wavlink
In this section, we highlighted all the steps that you should know. You just need to follow them as mentioned:
Power On the Wavlink Extender
You need to give sufficient power to the extender to power it up. Make sure the electricity source supplies a fluctuation-free power supply and should not be damaged.
Apart from it, if your device has a power cable, then insert it into the power port.
Connect the Router and Modem
Now, you need to make a constant and reliable connection between the host router and the Wavlink extender. You have two modes to connect the devices. The names of the modes are mentioned below:
- Wired Connection.
Both methods are very easy to use. You can follow one of them at your convenience. Whatever connection mode you use, make sure one thing that devices communicate with each other properly without any problem.
Turn on the Computer or Laptop
You need to turn on the computer or laptop. You can use any one of them according to which one you have in your home. Give a sufficient power supply to the computer to get the best outcomes.
Open the Internet Browser
Now, you need to launch the web browser on your device. You can use any browser according to your choice. Ensure that you use the upgraded internet browser because the outdated browser does not work properly.
Moreover, clear the extra files of the browser because cache and cookies corrupt the internal files of the device and create the issue between the process.
Access the Default URL
It’s time to access the default web address ap. setup. To do this you need to put the address into the URL bar carefully without making any typing mistakes. Once you enter the URL into the address bar press the Enter key.
Thereafter, you will see the Wavlink setup wizard in which you can make the changes in the settings of the extender according to your choice.
Hence, these are the steps that you need to perform to get access to the default web address.
In case you are not able to access the default web address then you don’t need to worry because below we mentioned some Wavlink extender troubleshooting tips.
Wavlink Extender Troubleshooting Tips
- Reboot the Wavlink extender.
- Check the Ethernet cable connection.
- Place the router and extender at half distance.
Therefore, these are the things that you can perform to solve the issues of the Wavlink extender in no time.