The web address, http ap setup has made it extremely easy for users to log in to the Wavlink extender, access its settings, to Wavlink setup, and perform the firmware update process in a hassle-free manner.
But, what if the web address is not working for you? Need not worry! To make you get rid of the issue, we have come up with this post. Here, we are going to annotate the reasons first why the web address is not working for you along with the troubleshooting hacks to get the issue fixes. So, without any more delay, let’s get started!
Why http ap setup is Not Working?
There could be a number of reasons preventing you from logging in to the Wavlink extender using the web address. Some of the topmost reasons are listed below:
Outdated web browser
Typos in the web address
Use of private window
Unstable internet connection
The web address is entered in the search bar
Wavlink extender and router are not connected to each other
That’s all about the reasons! Scroll down a little to get the fixes for the issue!
How to Fix http ap setup Not Working Issue?
Here are some of the best hacks explaining how to get rid of the issue while relaxing on your couch:
Fix 1: Reboot Your Wavlink Extender
Perhaps your Wavlink WiFi extender is the culprit and that is giving you issues while accessing the web address. Your Wavlink device may act weird because of technical glitches. So, to make your extender get rid of the glitches, we suggest you power cycle or reboot it.
Here are the steps required to reboot your Wavlink extender:
Turn off your Wavlink device and unplug it from the power socket.
Wait for a couple of seconds.
Turn the Wavlink extender back on.
Connect it to your router and see if you are able to access the web address or not.
Fix 2: Verify the Connections
Bear in mind, an unstable Ethernet or wireless connection between your Wavlink extender and router also leads to http ap setup not working issue. But, a stable connection between them helps you deal with it.
While connecting your devices, you have to keep some important points into consideration:
To connect your devices in a wireless manner, you must maintain a safe distance between them. In simple words, do not place your Wavlink extender and router too closer or far away.
And, if you have opted for connecting them using an Ethernet cable, you have to ensure that the cable isn’t damaged and it’s both ends must be connected to the correct Rockspace extender’s and router’s Ethernet ports.
Fix 3: Update Your Web Browser
You will not be able to log in to your Wavlink extender using the web address if the web browser version used by you is outdated. The problem can be fixed easily by simply updating your existing web browser version.
Apart from this, the use of a private window will also give you issues while accessing http ap setup.
Fix 4: Clear Browser’s Cache
Keep in mind, browsing history, cache, or junk files stored on your web browser may also give you issues while accessing the web address. So, ensure to clear all the trash from the web browser, restart the device (computer or laptop), and try to log in to the Wavlink extender again using the web address.
Still No Luck?
If none of the fixes outlined above bring you luck, then make sure that http ap setup is entered without typing errors, but not in the search bar field.
Need More Help?
To get success with http ap setup not working issue, make sure you have the fastest internet speed getting from your ISP end. Bear in mind, a wonky internet connection may never allow the web address for you to work without issues.
Our piece of writing comes to an end here! Anticipating that the fixes listed above help you rack up success with the “http ap setup not working” issue.