Hacks to Solve Netgear_Ext Not Showing on Network List Issue

In order to perform Netgear extender setup, one needs to access the network name of the extender. The network name of the extender is Netgear_ext. However, that is exactly what many people are unable to do. In case, you are also unable to perform mywifiext setup because of your inability to access the SSID of your wireless range extender, then this article is specially written for you.

Here, you will find every troubleshooting hack required to resolve the Netgear_ext not showing on the network list issue within a flash. With that said, continue reading.

[Solved] Netgear_Ext Not Showing on Network List Issue

1.      Replace the Connection Source

The number one reason why you are stuck with the Netgear_ext not showing on network list issue is because you have connected the networking devices with the help of a wireless source of connection. The usage of a wireless medium can be fatal as the connection between the extender and router can drop at any hour of the day. Bad, isn’t it?

To take care of the problem, it is recommended that you replace the wireless source with wired. In other words, connect your networking devices with the help of an Ethernet cable. You can do so by connecting one end of the cable to the extender and another to the router. Make sure that the cable connection is finger-tight. Keeping it loose will only cause issues.

2.      Move the WiFi Devices Closer

Another reason why you are stuck with the Netgear_ext not showing on network list issue is because there is too much distance between the wireless range extender and the host router. This can cause the signals emitted from both networking devices to get transmitted properly to every nook and cranny of the house.

Taking this into account, you need to reduce the distance separating the networking devices. However, make sure that you are not keeping them too close to each other. Or else, their signals will clash. And if this happens, then you can kiss troubleshooting the Netgear_ext not showing on network list issue goodbye.

3.      Remove Signal Interference

In case you are still struggling to make amends with the Netgear_ext not showing on network list issue, then it is because you have placed your wireless range extender at a location that is sharing space with metal objects, transmitting appliances, electronic devices, corners, and concrete walls, and reflexive surfaces.

Some of these things emit electromagnetic waves that mess with the signals emitted from the extender whereas some of them bound off the signals. In any case, you need to keep your extender away from these things to experience its best performance. Therefore, consider changing the location of your networking device right away.

4.      Install the Antivirus Software

There is a possibility that your computer got infected when you connected it to an external device. In case you are not certain about it, run a virus scan on your system. If what we are saying is true, then it is recommended that you install the antivirus software on your system. If you are using a laptop, the same can be applied.

After you are done following this troubleshooting hack, check if the Netgear_ext not showing on network list issue has left you for good. On the off chance, you are still its victim, you should not waste any more time walking through the following hack. Just because one hack could not help you out does not mean that the others will do the same.

5.      Do Netgear Extender Setup Again

Have you considered the possibility that you messed up during the Netgear wireless range extender setup process due to which you got stuck with the Netgear_ext not showing on network list issue? No? Well then, do so now. In order to eliminate this as the reason behind the issue at hand, consider setting up your networking device from scratch.

For your information, there are two different methods through which you can do Netgear extender setup. In the first method, you need to hit the WPS button on both devices, in the second method, you have got to access the user interface via the 192.168.1.250 IP address, and in the third method, you are required to use the Nighthawk app.

Conclusion

These were the topmost troubleshooting hacks with which you can resolve the Netgear_ext not showing on network list issue. Hopefully, you liked reading this article. If you did, consider sharing your feedback with your fellow readers using the comment section. They might appreciate the little effort.

Related posts