Thousands of users across the globe prefer installing a Netgear wireless range extender to access the flawless internet in their homes. However, some of them are unable to get the most out of their WiFi devices due to mywifiext.net not working error. Users experience this error because mywifiext.net is not a regular internet website. It is a web address using which you can explore the settings of your Netgear extender. Besides, many other reasons contribute to the error. If you are also struggling to get the error resolved, then we have got your back.
Read this article to know the various troubleshooting hacks that can help you get rid of the error in a snap. So, let’s start.
Tips to Get Rid of Mywifiext.net Not Working Error
- Reboot the Netgear Extender
Sometimes, while accessing the mywifiext setup wizard users are welcomed by an error message due to technical glitches. The only way to get rid of these glitches is to reboot your Netgear WiFi extender. Therefore, without any delay, reboot your WiFi device.
Here are the steps to reboot your extender:
- Firstly, disconnect all the client devices connected to your Netgear extender’s WiFi network.
- Thereafter, switch off your Netgear extender.
- Let your WiFi device stay idle for a while.
- Now, turn the Netgear extender on.
See if the error still persists. If yes, then it is time to give a shot to the next troubleshooting hack.
- Adjust the Extender’s Placement
The Netgear extender’s placement plays a crucial role in its performance. If it is not placed correctly, you might come across the mywifiext.net not working error. So, look around if there are any transmitting appliances like cordless phones, baby monitors, Bluetooth speakers, etc. near your Netgear extender. If yes, we recommend you place your extender away from them.
Remember that the room in which you have placed your Netgear extender should be neat and clean. Also, keep your WiFi at a specific distance from the reflexive surfaces as they might also create interference in the path of the extender’s WiFi signals.
- Stabilize the Connection Between WiFi Devices
Have you connected your Netgear extender setup and router properly? Probably not. Therefore, check if you have connected both WiFi devices wirelessly or using the Ethernet cable. If there is a wireless connection, then we highly advise you to opt for a hardwired connection.
If you are already using a hardwired connection, then check if the connection is finger-tight. Also, check for the cuts on the Ethernet cable. In case of cuts, replace the Ethernet cable with a new one. Once done, try accessing the mywifiext login page.
- Cross-Check the Web Address
Most users are unable to reach the Netgear Genie setup wizard due to the use of an incorrect web address. Are you making the same mistake? Bear in mind that the correct web address to log in to your Netgear extender is www.mywifiext.net. It should be typed correctly without any mistakes.
In addition, do not type the default web address in the search bar of the web browser as it will give no result and you won’t be able to access the mywifiext page.
Quick Tip: An outdated version of the web browser can also create issues while accessing the Netgear extender login page. So, make sure that your web browser is updated and is free from the cookies, cache, and browsing history.
- Reset Your Netgear Extender
Still unable to access the Netgear extender setup wizard? Don’t worry! You can get rid of the error by performing factory default reset of your WiFi device. It will definitely help you in resolving the error.
To factory reset your Netgear extender, ensure that it is getting enough power supply. Thereafter, locate the Reset button and press it using a pointed object. Your Netgear extender will get back to its initial settings. Thus, reconfigure it by accessing the mywifiext setup wizard.
So, these were the troubleshooting tips that will help you get rid of the mywifiext.net not working error. Let’s hope that you’ll be able to get rid of it and regain access to the Netgear extender login page.