Exploring Various Wood Options and Choosing the Right One to Make Your Perfect Boat

As a beginner, you are likely to get confused with the different options available to you to make boats.

Finalizing the Wood for Your Boat

In the case of wooden boats, the right wood type matters. Depending on the size of your boat, you can either opt for a single wood or choose multiple ones.

Your boat is not complete without fasteners, screws, plugs, or bungs. Here is where credible stores such as Fair Wind Fasteners, headquartered in Newport, RI can help you with varieties of parts for your boat. If you are planning to go with mahogany wood, then you can opt for a mahogany wood bung that will camouflage the screws and fasteners.

When it comes to boat parts, you need to select the right wood. In the case of frames, decks, or keel, you can choose teak or oak. Ashwood, oak, and pinewood can be used for your benches, breasthook, and knees. Pine, Ashwood, and oak can be used for your gunwale.

When it comes to wood, the most popular choices are:

  • Cedar
  • Mahogany
  • Plywood
  • Oak
  • Teak

Cedar is popular for making furniture, fencing, decking, and boat building. Some of the benefits of cedar wood include:

  • It contains less moisture, so it is less likely to crack
  • This wood can be cut easily with both small and big machinery
  • It is also resistant to harsh weather conditions as it is straight-grained
  • It is also known for its anti-rot and insect-repelling properties

The downside is that:

  • It requires a lot of maintenance
  • It is expensive
  • The color fades with time

Mahogany is a popular choice for boat construction due to its durability. Some of its benefits include:

  • It is rot-resistant
  • It is water-resistant
  • It does not shrink or warp during extreme weather conditions

The drawbacks include:

  • It is heavier than other hardwood
  • It is expensive
  • The color becomes darker when continuously exposed to sunlight

Plywood is a perfect choice for small boats. Some of its benefits include:

  • It gives a smooth laminate finish
  • It is economical
  • It can be cut into any shape

The drawbacks include:

  • It is not durable
  • It requires a lot of maintenance

Oakwood is considered to be one of the best choices for boat construction. Some of the benefits include:

  • It is known for its strength and durability
  • They are resistant to rotting and moisture
  • It can be manipulated to any form after steaming it

The drawbacks include:

  • They stain easily
  • They are prone to shrinkage and swelling if not properly maintained

Teak is a preferred wood choice by many boat owners. Some of the benefits include:

  • They are known for their tensile strength
  • They are rot resistant
  • They are water-resistant

The drawbacks include:

  • It is expensive
  • It requires a lot of maintenance

Tips for Adding Bungs to Your Boat

Bungs or wood plugs are used to cover fasteners and screws in a boat. The below tips can be helpful when you plan to install bungs to your boat:

  • Use the same wood piece used for the boat construction
  • Cut it into plugs with the help of a hand drill and a hole-cutter
  • Install the plugs into the holes and bind them with adhesive
  • Cut out the extra plugs that protrude to the surface with a small saw
  • The plugs should be in line with the flooring

Conclusion

The right wood type matters for your boats. Choose woods that are durable and easy to clean and maintain.

Related posts