Getting a red light is one of the most thwarting issues faced by Netgear router users. Owed to this error, users can’t access internet on their WiFi-enabled devices. So, it is important to get the Netgear router red light error fixed as soon as possible.
And by reading this article, you will get to know how to stop your WiFi router from showing the red light error. Let’s get started!
Why is My Netgear Router Showing Red Light?
There can be various reasons making your Netgear router show red light. A few of them are listed below:
- Your WiFi connection is congested.
- The router is not connected to your modem properly.
- Your router keeps dropping the WiFi connection.
- There is a loose or improper cable connection between your router and modem.
- A damaged cable is being used to connect your Netgear router and modem.
- The router is not placed at an ideal location.
- You are not connected to the network name of your WiFi router.
- Your Netgear device is getting interference from electronic devices, metal objects, and reflexive surfaces.
- An obsolete firmware on your Netgear router may also result in the red light issue.
- Partial router reset and firmware update is another reason behind the Netgear router red light issue.
- No MAC address is assigned to your WiFi router.
- The router is not configured properly. Or, routerlogin.net not working.
So, these were some of the main reasons leading you to the Netgear WiFi router red light issue. Now, let’s find how to get rid of the issue.
Troubleshooting: Netgear Router Red Light Issue
Below-listed are some easy-to-try troubleshooting tips to get rid of the Netgear router red light issue:
- Relocate your Netgear router to a ventilated area in your home.
- Keep the router away from metal doors, aluminum studs, microwaves, refrigerators, Bluetooth speakers, cordless phones, baby monitors, glasses, mirrors, and other interference-creating objects.
- Be sure that there is a finger-tight cable connection between your Netgear router and modem. Besides, no damaged cable is used to establish a connection between the router and modem.
- Connect all your devices to the network name of your router.
- Confirm whether the power outlet to which your Netgear router is connected is not short-circuited or damaged.
- Verify if your Netgear router is receiving a constant power supply from the wall socket.
- Check whether your Netgear router is connected to the internet or not. If not, connect it now by accessing the routerlogin.net login page.
- Update the firmware on your router to the latest version.
- Disconnect all devices that are unnecessarily connected to your WiFi router.
- Make sure that you have completed the router setup in the right way.
- Configure your router’s settings properly.
- If you own a Netgear Nighthawk router or the latest model, keep in mind to enable the One WiFi Name feature and assign the same SSID to the router as that of your modem.
- Reboot your Netgear router. For those who are new to rebooting, unplug your router from the wall socket, wait for some time, and then plug it back in again.
- Activate the FastLane technology on your Netgear router if it supports dual-band functionality.
- Restore your router to the default settings by pressing and holding the Reset button on it. Once done, again perform Netgear router setup.
Congrats! Your Netgear router should now stop showing the red light. Just in case if you know any of other tricks to fix the router red light issue, feel free to share that with us through the comments section.