A pressure washer can save time when washing a car. Using a bucket and sponge to clean a car seems so medieval now. Using a pressure washer not only reduces the amount of water used but also lessens the time taken and decreases the risk of damaging a car’s paintwork.
So, can you pressure wash a car? It is one of the safest methods of cleaning a car if performed correctly. Using a soapy sponge to clean your car can trap the dirt against the sponge and the vehicle, causing it to act like sandpaper. A pressure washer, however, rinses the grit and muck away from the surface of your vehicle.
Use a pressure washer with the right features:
Every pressure washer has a set of tips that shape the spray pattern and additional tips are available separately. One should use a 25-degree spray pattern for cleaning wheels and wheel wells. And a 40-degree spray tip is ideal for the rest of the surface of your car. A pressure washer with a PSI of 1200 – 1900 is an ideal one.
A pressure washer is an excellent car washing machine. You should start by breaking up caked on soils and washing away any loose residue. This touch-free cleaning lessens the risk of scratches. Firstly, you should start with the 25-degree spray tip and wash the tires, wheels, and wheel wells. Afterward, you should use the 40-degree spray tip and wash the whole exterior. You should start from the roof, windows, and windshield then the trunk and hood, and then the sides all the way to the lower panels.
You should spray the water on your vehicle in a downward direction to avert the risk of damaging your car’s paint. When washing the fragile parts like headlights, windows, and side mirrors, you should move away a bit.
You can attach foam cannon to your pressure washer. Foam cannons are able to mix the right amount of detergent, water, and air for breeding soap suds which are capable of coating a thick layer on the entire area of your car. You should start at the top and work your way down. Make sure to cover the entire vehicle with an adequate amount of foam. This foam helps break down the soil and also lift and surround the dirt.
Scrub off dirt and grease:
After applying the foam, you should let the car sit for some minutes allowing it to reduce the dirt. Now, grab a bucket, fill it with a car wash soap and water solution and take a clean microfiber car wash mitt. Dip your wash mitt into the solution, again, start at the top and then go down.
Rinse it off:
Once you are done scrubbing the entire exterior, now is the time to rinse all that soap, foam, and dirt away. You should rinse the car completely with the 40-degree spray tip on your pressure washer. Make sure not to leave any soap residue or dirt on the surface of your car. Be extra careful around doors and window seals. These areas require much more rinsing than the other spots of your car. After you are done washing, inspect your car and make sure everything is clean and clear.
Once you are done with the rinsing, now, use a high-quality microfiber towel to dry the car. Again, it’s crucial that you start at the top and work your way down. Make sure not to apply too much pressure while wiping. Instead of a towel, you can also use a blow dryer made for drying cars or a leaf blower.
Washing a car with a pressure washer allows you to do a more thorough job. It is a touch-free method that isn’t complex at all and it is designed to help you get the most value for money.
READ MORE: commercial cleaning services Sydney